Skip to the content

Audio Switchers & Source Selectors

This range of solutions will help you route and switch audio around your station.

Broadcast Radio Budget USB Stereo Audio Switcher

This budget stereo audio switcher allows you to switch a balanced stereo audio source on and off using commands sent via the built on USB controller. The box is powered directly from the USB port (so no external power supply) and is fully compatible with Myriad 4 Playout, Myriad 5 Playout and any other software that can send custom commands via a RS232 serial port (emulated). This simplifies the process or switching external audio sources such as news, with both audio switching and hardware I/O being handled with a single low cost box.

Broadcast Radio Budget USB Dual Stereo Audio Switcher

This budget stereo audio switcher allows you to switch two stereo audio sources on and off using commands sent via the built on USB controller. The box is powered directly from the USB port (so no external power supply) and is fully compatible with Myriad 4 Playout, Myriad 5 Playout and any other software that can send custom commands via a RS232 serial port (emulated). This simplifies the process or switching external audio sources such as news, with both audio switching and hardware I/O being handled with a single low cost rack mount unit.

Sonifex RB-SS10 10 Way Stereo Analogue Source Selector

The RB-SS10 10 way stereo analogue source selector/mixer is a 1U rack-mount unit that produces a stereo analogue audio output from 10 selectable stereo analogue sources. There are 10 illuminated front panel push-buttons, which select and indicate the current channel selection. 

Sonifex RB-DSS10 10 Way Stereo Digital Source Selector

The RB-DSS10 10 way stereo digital source selector/mixer is a 1U rack-mount unit that produces a stereo digtal audio output from 10 selectable stereo digital sources. There are 10 illuminated front panel push-buttons, which select and indicate the current channel selection.. 

Sonifex RB-PMX4 10 In, 4 Out Analogue Preset Mixer

The RB-PMX4 is a high performance 10 mono input to 4 mono output pre-set mixer. Each of the four outputs has a 10 way DIP switch associated with it to select which of the 10 inputs are routed to it. So, by altering the DIP switches, any of the input sources can be mixed to any of the outputs.

Sonifex RB-SSML1 Mic/Line Source Selector With Compressor/Limiter

The RB-SSML1 is a 1U rack-mountable source selector for compressing or limiting an incoming microphone or stereo line signal and mixing this signal with a stereo monitor input, which can then be metered and mixed to two headphone outputs. The unit is mainly used in situations where level control is required, for example in voiceover applications.

Sonifex RB-OA3 3 Studio On-air Switch

The RB-OA3 is a 1U rack-mount, unity gain on-air switcher, capable of switching three stereo pairs between three studios.

Sonifex RB-OAR Remote Switcher Panel For RB-OA3

The RB-OA3R is a 1U rack mount switch unit for use in each studio that needs to be connected to the STUDIO 1-3 CONTROL connectors on an RB-OA3. It takes it’s power from the RB-OA3 unit so needs no power supply itself.